Skip to content

Attendance

  • Attendance

  • Clocking in and out of the app

  • Check your attendance for the month

  • Requesting a correction to a clock-in record

  • Declaring hours worked without clocking in

  • Approving or rejecting declared hours

  • See who is working right now

  • Approve attendance corrections

  • Fixing a forgotten clock-out

  • Reading the monthly attendance sheet and overtime

  • Configuring workplace locations and their attendance check

  • Show the QR code at the site entrance

  • Set up the entrance kiosk and employee PINs

  • Clock in at the kiosk with your name and PIN

  • Set the time calculation rules

  • Choosing how people record their hours

All modules

Clock in at the kiosk with your name and PIN

Attendance · 14 of 16 · 6 min read

The kiosk screen lets you clock in without signing in to the platform: press your name, type your PIN, and the clock-in is recorded. This article describes the screen, the clock-ins, and the messages the kiosk can show.

The kiosk screen

The screen fills the whole tablet and opens from the kiosk link, without signing in. At the top it shows the location, the kiosk name, and the current time.

What appears depends on how the kiosk is set up.

  • Or tap your name: the list of employees at the location. It appears on kiosks with Manual selection. If the list is empty, the kiosk shows No employees available at this site.
  • Scan your badge: the badge area, with the text Hold your badge to the reader. It appears on kiosks with Badge scan and needs a badge reader connected to the tablet. After the badge is read, press Confirm.

With Require PIN on, the kiosk asks for the PIN after the badge or the name choice. Without Require PIN, choosing your name records the clock-in right away.

Note: the kiosk link is its credential. The first device that opens the link becomes the kiosk. On any other device the link shows This kiosk is set up on another device and no kiosk data, not even the employee list.

Clocking in with your name and PIN

The same steps apply to clock-in and clock-out. The kiosk does not ask which one you want to record: if you have an open session it records a clock-out, otherwise a clock-in. The result screen shows which one was recorded.

Before you start: you need a PIN, which your administrator sets in Attendance › Kiosks. The Door kiosk must be one of your recording modes.

  1. Under Or tap your name, press your name. A keypad opens with the title «PIN for Ahmed Benali».
  2. Type your PIN on the number keys. The digits appear as dots. The keypad accepts up to 12 digits. Delete last digit removes the last digit you typed.
  3. Press Confirm. The button stays disabled until you type at least one digit. While it sends, it shows Recording...

Cancel closes the keypad without recording anything.

The clock-in result

After clocking in, the kiosk shows the result full screen. After a few seconds it returns to the start screen, ready for the next person: 4 seconds for a clock-in, 7 for a clock-out.

  • «Welcome, Ahmed Benali»: clock-in recorded. Below it, Clock-in recorded at appears with the time.
  • «Goodbye, Ahmed Benali»: clock-out recorded. Below it, Clock-out recorded at appears with the time, and a line with the start and duration of the closed session, which begins with «Session started».

Correcting a clock-out recorded by mistake

If you were clocking in and the kiosk recorded a clock-out, you can turn it into a clock-in from the kiosk. The button stays available for 30 seconds after the clock-out.

Press This is wrong — I am arriving in the bottom bar: the kiosk shows the result of the new clock-in. After the 30 seconds the button disappears. To correct the clock-in itself, an adjustment approved by a manager is required.

Choosing your PIN instead of the temporary one

The PIN set by the administrator is temporary. The first time you use it at the kiosk, you must replace it with a PIN of your own.

  1. Type the temporary PIN and press Confirm. The keypad reopens with the title «Elena Russo, choose your own PIN (6 to 12 digits)».
  2. Type the new PIN and press Confirm. The keypad asks «Elena Russo, type your new PIN again».
  3. Type the new PIN again and press Confirm. The kiosk saves the PIN and records the clock-in.

The new PIN must contain digits only, 6 to 12 of them. If it does not follow the rule, the kiosk shows The new PIN must be 6 to 12 digits. If the two PINs differ, it shows The two PINs did not match. Start again. In both cases the clock-in is not recorded and you start again from your name.

Closing a session left open from a previous day

The kiosk does not close a session left open from a previous day on its own: after identifying you, it shows a title with your name and the start of the session, which ends with «is still open», and asks what to record.

  • I am arriving now: records a clock-in. Choose this if you are starting work.
  • «Close the session from», followed by the date and time and «now»: records a clock-out on the open session. Choose this if you are finishing work.
  • Cancel: returns to the start screen without recording anything.

Kiosk messages

While clocking in, the kiosk may show these messages.

  • Wrong PIN.: the PIN you typed is not correct. The clock-in is not recorded.
  • No PIN set. Ask your administrator.: you do not have a PIN. The administrator sets it in Attendance › Kiosks.
  • «Already recorded: Ahmed Benali clocked in at» or «Already recorded: Ahmed Benali clocked out at», followed by the time: you already clocked at the kiosk less than 2 minutes ago, and the second clock-in is not counted.
  • Too many attempts. Wait a minute and try again.: too many wrong PINs in a row.
  • This badge cannot be used at a kiosk.: the Door kiosk is not one of your recording modes. This message also appears if you identified yourself by name.
  • You have declared hours for today, so it cannot be clocked as well. Ask your manager.: you have a declaration for today.
  • Your session is too short to clock out yet.: the session is shorter than the minimum duration.
  • Daily clock-in limit reached. Ask your manager to record this service as a correction.: you have reached the maximum number of sessions for the day.

When the link is opened, the kiosk may instead show a full-screen notice in place of the employee list.

  • This kiosk is set up on another device: the link is tied to another tablet. To use it on this tablet, the administrator must reset the kiosk device.
  • This kiosk link is invalid or has been revoked.: you need a new link from the administrator.
  • The door kiosk is switched off: the organisation does not record hours from the kiosk.

← Previous

Set up the entrance kiosk and employee PINs

Next →

Set the time calculation rules

On this page

Book a demo

See it on your company, not on a slide deck.

In 30 minutes we map the software you use today.We show you how much work and how much margin Archimedes gives back.

Show me on my business →
No commitmentReply within one working day