Skip to content

Transport

  • Transport

  • How Transport works: from order to delivery

  • Setting up the depot, costs and order source

  • Delivery zones

  • Capabilities: what a vehicle can do and what a product requires

  • Logistic families: how a product travels

  • The fleet: adding and managing vehicles

  • The drivers

  • Orders to deliver

  • An order record: load, packages and delivery

  • Planning the day

  • Creating trips manually or having them composed

  • A trip from draft to closure

  • The load plan

  • Route and cost of a trip

  • Delivery notes (DDT)

  • The driver's page on the phone

  • How much transport costs: reports

All modules

How Transport works: from order to delivery

Transport · 2 of 18 · 8 min read

The Transport module organizes the deliveries of what you sell. You can use your own vehicles, the vehicles of an external carrier, or both. Azienda Demo S.r.l., for example, delivers the furniture it sells from Milan, Via Roma 10. It uses both its own vans and the Brambilla rigid truck from Autotrasporti Brambilla S.r.l.

In the interface the external carrier is called Subcontractor: you will find it in the vehicle's Ownership field and in the cost report.

The journey of a delivery

A delivery always follows the same path, from the arrival of the order to the closing of the trip.

  1. A transport order arrives from the order management system and appears among the To plan orders. Each order has a customer, a destination, a zone, a Promised date and the lines with products and quantities. This is the case of ORD-2026-0148 from Studio Bianchi & Associati, in Rome.
  2. The planner puts the order on a trip. A trip has a vehicle, a driver and a day. Its Stops are listed in unloading order. Orders from the same customer at the same address go into the same stop.
  3. The trip moves from Draft to Confirmed. With confirmation, the driver's link is created — the page the driver opens on their phone. After confirmation you can generate the delivery note.
  4. When the vehicle departs, the trip moves to Departed. Each delivered stop is recorded from the office with Delivered in the trip's page, or by the driver with Confirm delivery on their page.
  5. When the round is complete, Close trip brings the trip to Closed. All stops and all orders in the trip are marked as delivered.

In Azienda Demo S.r.l. orders arrive via API from another management system. Alternatively they can come from the Sales module's orders. The choice is made in the transport settings.

Order statuses

The Transport › Orders list has a Status column and a filter with the same name. Each status tells the planner what remains to be done.

  • To plan: the order is not on any trip. This is the status of every newly arrived order. It also returns to this status when you remove it from a trip or when its trip is cancelled.
  • Planned: the order is on a trip. It becomes this when you assign it to a Draft or Confirmed trip.
  • Delivered: the delivery is recorded. This happens with Delivered on the trip's stop, with Confirm delivery from the driver's page, with Close trip, or with Mark delivered in the order's page.
  • Cancelled: the order no longer needs to be delivered, like ORD-2026-0150 from Marco Neri.

If the promised date has already passed, the order is "late" and appears in red in Planning: this is the case for ORD-2026-0148 and ORD-2026-0149. Put these on a trip first.

The details are in the article Orders to deliver.

Trip statuses

A trip changes status only through the commands in its page. The statuses follow a fixed path.

  • Draft: the trip is being prepared. You can add and remove orders, change the stops and the vehicle. From here the trip moves to Confirmed or Cancelled.
  • Confirmed: the trip is set and the driver's link is created. You can still add and remove orders. With Back to draft you return to Draft. From here the trip also moves to Departed or Cancelled.
  • Departed: the vehicle is on the road. From here the trip can only move to Closed, so a departed trip can no longer be cancelled.
  • Closed: the round is complete. The status is final. The cost report counts trips of every status except cancelled ones, so a trip appears there already before closing.
  • Cancelled: all orders in the trip return to To plan. The status is final. This is the case of the Eurocargo truck trip from two days ago, cancelled because the truck is in the workshop.

Important: Close trip also marks unconfirmed stops as delivered. Use it only when all deliveries are truly complete.

The transition from one status to another is explained in A trip from draft to closure.

The Dashboard

The Dashboard shows at a glance what needs to be planned, what is on the road and how the fleet is doing.

You open it from Transport › Dashboard: it is also the page that opens when you enter the module.

The Transport Dashboard with the To plan, Trips today, Deliveries in the last 7 days and Fleet cards

The Dashboard has four cards:

  • To plan: how many orders are waiting for a trip, their total weight and how many are overdue. Today there are 7 orders, 1,070 kg, 2 overdue.
  • Trips today: how many trips there are today, divided by status. Today there are 3 trips: 1 draft, 1 confirmed, 1 departed.
  • Deliveries: how many orders have been delivered in the last 7 days.
  • Fleet: how many vehicles are active, including those of external carriers, and how many are under maintenance: 3 active (Daily van, Ducato van and Brambilla rigid truck) and 1 under maintenance (Eurocargo truck).

Every morning check these situations:

  • If there are overdue orders, put them on a trip first.
  • If a trip for today is still in draft, complete it and confirm it before departure.
  • If a vehicle is under maintenance, it does not appear among the vehicles you can choose. If a trip already had it, move it to another vehicle with Switch vehicle.

The Transport menu items

The Transport menu has six items, each with a specific purpose.

  • Dashboard: the situation for the day. It is described in the previous section.
  • Planning: the working day. On the left you find the To plan orders, divided by zone. On the right you find the Trips of the day. To change the day use the arrows on either side of the date. To put an order on a trip drag it onto the trip, or open the order's ⋯ menu and choose Assign to followed by the vehicle name. To remove it use remove. With New trip you create a trip manually. With Compose trips you have draft trips proposed. See Planning the day and Creating trips manually or having them composed.
  • Orders: the orders to deliver, with the Reference, Customer, Zone, Promised date, Source and Status columns. See Orders to deliver.
  • Vehicles: the fleet, with your own vehicles and those of external carriers. You can filter by Ownership and Status. With New vehicle you add a vehicle. See The fleet: adding and managing vehicles.
  • Reports: how much transport costs, by customer, by zone and by month. Choose the period with the two date fields at the top right. All trips in the period count except cancelled ones. See How much transport costs: reports.
  • Settings: the module configuration, divided into the Capabilities, Zones, Logistic families and Source tabs. See Setting up the depot, costs and order source.

Planning with orders to plan on the left and the trips of the day on the right

What to prepare before the first trip

To plan trips, calculate the load plan and estimate costs, you need some data. Prepare it in this order.

  1. In Transport › Settings, on the Source tab, specify where orders come from. Also set the address of the yard from which trips depart, the map service and the cost parameters. See Setting up the depot, costs and order source.
  2. On the Zones tab, create the delivery zones, for example Milan city centre and Piedmont. See Delivery zones.
  3. On the Capabilities tab, create the vehicle equipment options, for example Tail lift. See Capabilities: what a vehicle can do and what a product requires.
  4. On the Logistic families tab, describe how products travel, for example Lamp carton, with 6 lamps per carton. Then link the families to the products. Without a family or dimensions, a product has an incomplete logistic profile and is excluded from the load plan. See Logistic families: how a product travels.
  5. In Transport › Vehicles, add vehicles with New vehicle. Specify the cargo bay dimensions, payload, capabilities and costs. Without the cargo bay dimensions, the load plan cannot be calculated. See The fleet: adding and managing vehicles.
  6. Mark the contacts who drive as drivers: only they can be selected as the driver of a trip. Today the Is a driver field does not appear on the Contacts screens: ask support to set it. See Drivers.

Who can see the module

Access to Transport depends on two permission groups.

  • Transport User: reads, creates and edits orders, trips and vehicles, as well as capabilities, zones and logistic families. Cannot delete anything and cannot edit the Source tab in settings.
  • Transport Manager: has full access. Can also delete and edit the Source tab: order source, API key, yard, map service and cost parameters.

Drivers do not need access. They use the public page reached via the driver link.

← Previous

Transport

Next →

Setting up the depot, costs and order source

On this page

Book a demo

See it on your company, not on a slide deck.

In 30 minutes we map the software you use today.We show you how much work and how much margin Archimedes gives back.

Show me on my business →
No commitmentReply within one working day