Transport
All modules
Creating trips manually or having them composed
Transport · 12 of 18 · 8 min read
From Planning you create the day's trips in two ways. With New trip you create one trip at a time: you choose the vehicle and driver and then assign orders. With Compose trips it is Archimedes that proposes trips based on the orders to be planned.
When to create manually and when to compose
In both cases you work on the day shown by Planning. To change day use Previous day and Next day.
- If you have many To plan orders in well-defined zones, use Compose trips. The wizard groups them by zone and fills the available vehicles.
- If you have few orders, or have already decided the vehicle and driver (for example the Brambilla rigid truck with Walter Brambilla for Turin), use New trip.
- If an order needs a specific vehicle, or a vehicle the wizard would not use, create the trip manually.
Composed trips are created in Draft. You can edit them in Planning before confirming them.
Creating a trip manually
A manually created trip starts empty: you add orders to it afterwards.
- Open Transport › Planning and choose the day.

- Click New trip. The New trip window opens.

- Fill in the fields and click Create. With Cancel you close the window without creating anything.
The window's fields:
- Date: the day of the trip. The field is already filled in with the Planning day and is required.
- Cost: the cost of the trip, optional, as the placeholder "Agreed fee / internal cost" reminds you. You can leave it empty: later, from the trip route, Archimedes estimates the cost and enters it with Use as cost (see Route and cost of a trip). The cost is what appears in reports.
- Vehicle: the vehicle that makes the trip. The vehicle determines the load capacity, the bay volume and the capabilities with which the load is checked. The list shows only Active vehicles, with name and license plate: Daily van — GH 412 KM, Ducato van — FZ 238 PL and Brambilla rigid truck — GA 110 BB; the Eurocargo truck, under maintenance, is not there. The list does not say whether a vehicle already has a trip that day: check it in the Trips of the day column.
- Driver: who drives, chosen from contacts marked as drivers (Davide Marino, Roberto Fontana, Walter Brambilla; see The drivers). When the trip is confirmed, you send the driver the link to their page.
- Notes: free text about the trip.
How to choose the vehicle and driver:
- If the orders contain products that require a capability, choose a vehicle that has it. Otherwise the trip shows Missing capabilities, as the Brambilla rigid truck does today for the metal cabinets of Verdi Costruzioni S.p.A. (Missing capabilities: Tail lift).
- If the driver already has another trip on the same day, the trip is still created, but its card shows "Driver already on another trip the same day".
- The loading plan requires a vehicle with bay dimensions: without a vehicle it cannot be calculated.
Note: the driver link is only created when the trip is confirmed. A draft trip does not yet have a driver page.
- Add orders to the trip. Drag them from the To plan column onto the trip card, or use the ⋯ menu of the order card. Each assigned order becomes Planned.
Composing trips automatically
Compose trips opens the wizard that proposes the day's trips based on the To plan orders.
- Open Transport › Planning and choose the day to compose.
- Click Compose trips. The Compose trips for Nov 2, 2026 window opens, with the date of the chosen day. If there are no orders to plan, the button is disabled.

- Check the list of orders. Each row shows the customer, the zone and the promised date, for example Anna Russo South Milan · Oct 31, 2026. An order without a zone shows No zone, for example Bar Centrale di Paolo Riva No zone. When opened, all orders are selected and the button shows Propose trips (7 orders).
- Uncheck the orders you do not want to plan today. The button reports how many orders remain: with Bar Centrale excluded it becomes Propose trips (6 orders).
- Click Propose trips. Despite the name, the button does not show a proposal to approve: it immediately creates trips in Draft and assigns orders to them. With Cancel you close the window without creating anything.
- The window shows the result, such as "Created 2 draft trips with 5 orders", and below Not planned the orders that were left out, each with the reason. Click Back to the board to return to Planning and review the trips.
At step 4, exclude especially the orders that do not yet have all their data, such as a No zone order, and those for which you have already decided the vehicle: plan them manually.
How the wizard composes trips
The wizard makes an initial proposal, not an optimized route. It follows these rules:
- It takes only the selected orders still To plan, in order of promised date: oldest first, those without a date last. Late orders, such as those from Anna Russo and Studio Bianchi & Associati, are considered first.
- It groups orders by zone: orders from different zones do not end up on the same trip. Orders without a zone are grouped by address proximity, if the address has already been geolocated; otherwise they end up in a common group.
- It uses only Active vehicles that have bay dimensions and load capacity and that do not already have a trip in Draft, Confirmed or Departed that day.
- Among suitable vehicles it chooses own vehicles first and then subcontractors' vehicles, and among these the smallest vehicle that suffices.
- It places an order on a vehicle only if the vehicle has all the capabilities the products require, if weight and volume remain within the load capacity and bay, and if every package fits in the bay. A package with a fixed orientation is not rotated. It uses at most 85% of the bay volume, so the loading plan has margin.
- Orders from the same customer at the same address end up in the same stop.
What it proposes and what it leaves out
The wizard creates a trip in Draft for each vehicle it uses, with the stops and assigned orders. Orders placed on a trip become Planned. The created trips have the vehicle but not the driver (the card says "Driver to assign") and do not yet have a load plan ("plan to compute").
The orders it cannot place remain To plan and the wizard indicates them with the reason:
- "incomplete logistic profile": at least one line of the order does not have the package dimensions or weight, either from the product or from the logistic family, or it is not linked to a product, such as the Acoustic panels 120x60 line of
ORD-2026-0160. Without that data the wizard does not know how much space the order takes up and leaves it out entirely. - "no available vehicle with sufficient capabilities and capacity": no vehicle available that day has the required capabilities, load capacity, or bay space for the order.
Important: the reason "no available vehicle with sufficient capabilities and capacity" also appears when suitable vehicles exist but already have a trip that day. This happens today, Nov 2, 2026: the Daily van, the Ducato van and the Brambilla rigid truck already have a trip, so a composition for today would leave all orders out. Compose for a day that is still free, such as tomorrow, or assign orders manually to existing trips.
Adjusting trips in Planning
Composed or manually created trips can be edited in Planning as long as they are in Draft or Confirmed.
- To move an order to another trip, first remove it with remove, then drag it to the new trip or use the ⋯ menu: an order already Planned cannot be assigned to a second trip.
- To remove an order from a trip use remove: the order returns to To plan. An empty stop is deleted.
- Composed trips are created with "plan to compute": calculate the plan from the trip card when the orders are correct, and recalculate it if you add or remove orders.
- For an order left out due to "incomplete logistic profile", complete the product profile and then assign it.
- For composed trips, choose the driver: open the trip, click Edit and fill in Driver before confirming it, otherwise you do not know who to send the link to.
See it on your company, not on a slide deck.
In 30 minutes we map the software you use today.We show you how much work and how much margin Archimedes gives back.
Show me on my business →What industry are you in?
One tap — it lets us prepare the demo around your world.
What tools do you use today?
Pick the ones you recognise — or just type them. It helps us show you how they migrate.
Last step: your details.
We reply within one working day — and right after, if you like, you pick the demo slot yourself.
We couldn't send your request. Try again, or write to us at [email protected].
By sending, you agree to your data being processed so we can get back to you about the demo. Privacy notice.
Preview form — nothing is sent from this page.
Want to schedule the demo now?
Your call: book the slot you prefer yourself, or we'll call you to arrange it.
Live availability, 30 minutes, instant confirmation. The calendar opens in a new tab.
Lock in your slot ↗We'll get back to you within one working day — and we'll join the call already knowing your world.
The calendar is open in another tab: pick a slot and the demo is booked. Can't see it? Reopen it ↗
Preview page: nothing was sent.
Our calendar is live: take the slot that suits you and the demo is booked. 30 minutes, instant confirmation, no waiting.
Lock in your slot ↗